F20 montageoplossing - SUNFER
kit 4 panelen F20-4 TILES - ref 90365-C
Technische specificaties
-Installatiecapaciteit: Met de F20-4 kunnen maximaal 4 fotovoltaïsche panelen worden geïnstalleerd, met een maximale grootte van 2279×1150 mm per module. De kit is compatibel met panelen met een dikte tussen 28 en 40 mm.
-Hoogwaardige materialen: De kit maakt gebruik van EN AW 6005A T6 aluminium profielen, een zeer corrosiebestendige aluminiumlegering die een lange levensduur garandeert, zelfs in veeleisende omgevingen. De schroeven en bouten zijn gemaakt van A2-70 roestvrij staal, voor extra sterkte en betrouwbaarheid.
-Verankeringssysteem: De F20-4 is uitgerust met een robuust verankeringssysteem, geschikt voor verankering in houten balken van C24-kwaliteit of hoger. De meegeleverde schroeven hebben een diameter van 6 mm en een aanbevolen aanhaalmoment van 6 Nm, waardoor een veilige en duurzame bevestiging gegarandeerd is.
Voordelen van de F20-4
1.Vereenvoudigde installatie: De F20-4 kit is ontworpen om het werk van de installateur eenvoudiger te maken, met voorgedefinieerde onderdelen die de onzekerheden wegnemen die gepaard gaan met de aankoop van reserveonderdelen. Alles wat je nodig hebt om vier fotovoltaïsche modules te installeren is inbegrepen, waardoor je minder voorbereidingstijd nodig hebt en de installatie sneller verloopt.
2.Robuustheid en betrouwbaarheid: De F20-4 profiteert van de productiekwaliteit van Sunfer, die bekend staat om zijn vermogen om de meest extreme weersomstandigheden te weerstaan. Het systeem is getest en gecertificeerd volgens de Eurocode 9-normen, waardoor het optimaal bestand is tegen sneeuwbelasting en harde wind.
3.Kostenoptimalisatie: Door een complete kit voor 4 panelen aan te bieden, optimaliseert Sunfer de installatiekosten door de aankoop van onnodige extra componenten te vermijden. Dit betekent lagere kosten voor installateurs en eindklanten, terwijl een installatie van hoge kwaliteit gegarandeerd is.
4.Flexibele installatie: De F20-4 is geschikt voor verschillende soorten daken en kan staand of liggend worden geïnstalleerd, afhankelijk van de behoeften van het project. Deze flexibiliteit maakt hem ideaal voor een breed scala aan projecten, zowel residentieel als commercieel.
5.Voldoet aan de veiligheidsnormen: Bij het ontwerp van de F20-4 is rekening gehouden met de beste praktijken op het gebied van veiligheid. Het zorgt voor een betrouwbare bevestiging van de modules en minimaliseert het risico op uitval of verplaatsing van de panelen onder invloed van sneeuw of wind.
Conclusie
De F20-4 van Sunfer is de ideale oplossing voor installateurs die op zoek zijn naar een complete en betrouwbare montagekit voor de installatie van vier fotovoltaïsche modules. Het combineert een uitstekende bouwkwaliteit met installatiegemak, terwijl de kosten worden geoptimaliseerd en duurzame prestaties worden gegarandeerd. Of het nu voor residentiële of commerciële projecten is, de F20-4 garandeert een veilige, efficiënte en esthetisch verantwoorde installatie.
Beschrijving van het Sunfer F20 montagesysteem
Het Sunfer F20 montagesysteem is een robuuste en betrouwbare bevestigingsoplossing voor het installeren van fotovoltaïsche modules op daken met liggende of staande dakpannen. Het systeem is speciaal ontwikkeld om optimale stabiliteit te garanderen terwijl het voldoet aan de strengste veiligheidsnormen.
Technische specificaties
-Compatibiliteit: Het F20-systeem is compatibel met modules van verschillende afmetingen, met een maximale capaciteit van 2279×1150 mm. Het ondersteunt modulediktes van 28 tot 40 mm, wat een grote flexibiliteit biedt voor verschillende installatieprojecten.
-Kwaliteitsmaterialen: de gebruikte profielen zijn gemaakt van geanodiseerd aluminium EN AW 6005A T6, een materiaal dat bekend staat om zijn lichtheid en corrosiebestendigheid, waardoor de duurzaamheid van de installatie gegarandeerd is. Schroeven en bouten zijn gemaakt van A2-70 roestvrij staal, wat zorgt voor een stevige, duurzame bevestiging, zelfs in moeilijke klimatologische omstandigheden.
-Bevestiging en verankering: Het F20-systeem gebruikt schroeven met een diameter van 6 mm en een aanhaalmoment van 6 Nm voor een betrouwbare bevestiging. Voor een nauwkeurige installatie is een voorboor van 4 mm vereist. De bevestiging is speciaal ontworpen voor verankering in houten balken van het type C24 of beter, voor een perfecte bevestiging op pannendaken.
Prestaties en veiligheid
-Belastingsweerstand: Het F20-systeem is getest volgens de Eurocode 9-normen, waardoor het bestand is tegen hoge belastingen, waaronder typische sneeuwbelasting en sterke wind, afhankelijk van de dakhelling. Gedetailleerde tabellen tonen de maximaal toegestane belastingen voor verschillende dakhellingconfiguraties (van 5° tot 40°), zodat het systeem nauwkeurig kan worden aangepast aan de plaatselijke omstandigheden.
-Symmetrische installatie: Tijdens de installatie is het cruciaal om de modules symmetrisch te verdelen om een gelijkmatige verdeling van de belasting over de hele constructie te garanderen. Het F20-systeem kan staand of liggend worden geïnstalleerd, wat flexibiliteit biedt bij de lay-out om de energie-efficiëntie en de esthetiek van de installatie te optimaliseren.
-Extra opties: Voor complexere installaties biedt het F20 systeem optionele verbindingskits waarmee meerdere kits aan elkaar gekoppeld kunnen worden, wat de modulariteit van het systeem vergroot. Daarnaast zijn er optionele wartelklemmen beschikbaar voor een schoon en veilig kabelbeheer.